Five Ways To Remove Stains In Laundry Shops

< p > remove stains should be applied flexibly according to the characteristics of stains. Different stains apply different chemical stains. The method of removing stains is also different.

Proper use.

It helps to remove stains.

Otherwise, the lighter will affect the decontamination effect, and the heavy will damage the fabric fiber.

< /p > < p > usually remove stains in the following ways: < /p >

< p > 1. injection method < /p >

< p > the spray gun equipped on the broken platform has the functions of jet pure steam, ancient water vapor, compressed air and so on. It provides a mechanical force.

The jet method uses the force to remove or remove the water-based soluble stains.

When applying this method to remove stains, we should pay attention to: < /p >

< p > (1) < a href= "//www.sjfzxm.com/news/" > fabric < /a > structure can tolerate certain mechanical force: < /p >

< p > (2) stains will not solidify or dissolve deep inside the fabric: < /p >

< p > (3) the distance and angle of the spray gun and the time of the injection.

< /p >

< p > 2. wipe method < /p >

< p > wipe is a common way to remove stains.

It is a stain that points to fabric and applies a certain mechanical force to remove stains from the fabric due to wiping.

Wiping is usually done in the following ways: < /p >

< p > (I) brush on the surface of the stains after adding the stain remover. Wipe the surface of the stain with the brush t to make it loose, then lightly brush until the stain is separated from the fabric.

< /p >

< p > (2) scraper wipe the surface of the stains after adding the stain remover, let it permeate and dissolve, scrape the scraps and scrape the stains away from the fabric.

< /p >

< p > (3) the positive wiping type is covered with a href= "//www.sjfzxm.com/news/index_c.asp" > cotton < /a > to form a ball, dipped in the soiling agent, wiping gently on the surface of the stain and removing the stains.

< /p >

< p > (4) the back is wiped with a fine piece of cloth to form cotton balls. A dipping agent is removed to wipe the back of the stain.

< /p >

< p > 3. immersion method < /p >

< p > < a href= "//www.sjfzxm.com/news/index_c.asp" > stains > /a > closely combined with fabric. When dropping stains and cleaning can not be removed smoothly, proper stains can be used in containers. Soak the stains of fabrics, so that the stain remover can be adequately treated with time and stain.

After a period of action, use the brush to gently brush. It helps to remove stains from < /p >.

< p > 4. absorption method < /p >

< p > for some fabrics, such as fine fabrics, loosely structured fabrics or some stain stained stains.

For example, large area ball point pen oil can be absorbed by absorption method to help remove stains.

The method is to add a proper amount of stain remover on the fabric stains and dissolve it with cotton cloth on the back of the stain after it is dissolved, so that the stains after dissolution are gradually pferred to the cotton fabric.

After each collection, a thousand net cotton balls should be replaced. Avoid the two pollution.

< /p >

< p > 5. strong washing method < /p >

< p > for large area stains, a strong washing method can be used when a mild mechanical effect can not achieve good decontamination effect.

After the a href= "//www.sjfzxm.com" > fabric stains < /a > surface applied to the penetrant, after being penetrated, use the brush to strengthen or scrape and force the scraping test, and remove the stain from the fabric by strong mechanical action.

< /p >

< p > the use of strong washing must follow a premise that the structure of the brushed fabric should be tight and wearable. If the color fabric is made, it depends on whether the color fastness is suitable for strong washing.

Using this method to deal with stains on fabrics will damage the fabric more or less and reduce the fabric life.

Therefore, we should not apply strong washing to remove stains.

< /p >

< div style= "left: -1000px; top: 0px; width: 1px; height: 1px; overflow: 1px;"