Fashion Designer Helps You Interpret The Operation Steps Of Star Dress Deep V Dress Modeling

This dress is a straight H-shaped silhouette, with deep V-shaped neckline on shoulders and flanging on the chest Modeling design There is a certain amount of swing at the bottom and a small trailing tail at the back is about 40cm~50cm long. The skirt body is more fit above the hip circumference, and the swing is gradually increased under the hip circumference. According to the effect of the picture, the swing is designed to be 180cm around. Because there is a trailing tail at the back, the swing is more at the back and less at the front according to the shape.

Support material: hard lining. The chest has a flanging design. In order to have a good effect, in addition to proper structure, lining is also necessary.

Operation steps: only the front of the dress is taken as an operation case, and the back of the dress is omitted; Gray cloth only completes the single layer effect, and it needs to be adjusted on this basis during actual production.

clothing designer Understanding the operation steps of deep V dress modeling

Step 1: mark the line, the designed style line and structure line, on the platform.

Fashion Designer Interpretation of Deep V full dress Modeling steps

A seam is designed at the junction between the hem of the chest and the skirt body. Because the seam is slightly higher, it is difficult to deal with the chest volume only by this line. Unless there is support from the fabric properties, a knife back is added on the side (without affecting the overall effect of the dress), so that the chest volume can be handled well and the manufacturing difficulty can be simplified.

Fashion designers interpret the operation steps of deep V dress modeling

Step 2: three-dimensional upper plate. The most common problem with deep V-shaped neckline is that the neckline is loose. During operation, the neckline must be free of content and the bust dart should be cleaned. Improve the waist, do not design the waist loose, give some slack at the hip circumference.

There is an upturned flanging on the chest. This effect can not be achieved when the fabric is stiff Adhesive lining Or add a layer of support material to change the original material properties of the fabric. It is recommended to use paper for three-dimensional sample binding, because the feeling of paper is closer to the final effect. The white cloth is still soft, affecting the accuracy of the structure.